Cationic surfactant
Liquid Softener DS-503 / 2-hydroxyethyl)imino]di-2,1-ethanediyl ester
Liquid Softener DS-503 / 2-hydroxyethyl)imino]di-2,1-ethanediyl ester
Abbreviation：DS-503
INCI Name : 2-hydroxyethyl)imino]di-2,1-ethanediyl ester
Product Name : Liquid Softener
CAS NO. : 54999-00-7
INCI Name : 2-hydroxyethyl)imino]di-2,1-ethanediyl ester
Product Name : Liquid Softener
CAS NO. : 54999-00-7
DETAIL
Characteristics and advantage :
1.Applicable to all kinds of fiber fabrics, excellent hydrophilicity, good soft handle feeling
2.Low viscosity, good stability
3.Have some co-emulsification and antistatic effect
4.An AEEA-free product
5.Compared with silicone oil, it has great cost advantage and high cost performance ratio
Dissolving method :
DS-503 is a high concentration of original liquid, cannot be used directly, need to be dissolved into 5~20% content in advance (excessively high content may influence redilution and redispersibility) of the solution. DS-503 dissolution method and the operation process are very simple. Under slow stirring, add the required percentage of room temperature water directly into the product. Stir until homogeneous emulsion, filtering and set aside.
Recommended dosage : (Calculated with 10% aqueous emulsion)
Padding method : 10～60g / L, temperature 30～40℃, one dip one rolling or two dip two rolling.
Impregnation method: 1～6%(o.w.f), temperature 45～60℃,
bath ratio:1:10～15, 20～30 minutes.
Packaging and storage :
1. Storage: This product is valid for 12 months stored in a cool and ventilated warehouse.
2. Packaging: Plastic drum, net weight 120kg / drum.
3. Transportation: This product is transported according to non-dangerous goods.
Notice :
DS-503 from pure natural grease chemical, the appearance of the product may change with the temperature change. At low temperature the transparency of the product will decline until completely opaque. In extreme low temperature the products may lose their liquidity, was paste-like form. When the appearance of the product between transparent and opaque may appear local stratification, this is a normal phenomenon and does not affect the performance of the product itself! Just at this time the product temperature rises slightly to restore the original appearance of the product.